AMPED WIRELESS

Model:  SR300 Firmware Update

Firmware Version: 1.2e.04

Updated: 12/28/2011

_______________________________________________________________________________________________________


FIRMWARE UPGRADING INSTRUCTIONS:

You may call support at 888-573-8820 at any time for questions regarding this process.

 
PLEASE DISCONNECT FROM ALL WIRELESS NETWORKS BEFORE UPGRADING FIRMWARE.
PLEASE CONNECT DIRECTLY TO THE REPEATER WITH THE INCLUDED ETHERNET CABLE. 

1.	Open your web browser and go to http://setup.ampedwireless.com 
2.	When the menu appears, click on More Settings then click on Management (left side menu)
3.	Go to Upgrade Firmware.
4.	Click on choose file.
5.	Select the Firmware file for your product (fw-sr150_mmddyy.bin, fw-sr300_mmddyy.bin) 
6.	Click on upload.
7.      The Smart Repeater will reboot and your page will refresh when completed.
8.      Your firmware has now been updated.  You may disconnect your computer from the Smart Repeater
        and begin using it normally.

Thank you

AMPED WIRELESS ELITE SUPPORT

___________________________________________________________________________________________________________

121611 FIRMWARE RELEASE NOTES:
- Fixed Home Network Connection. Now able to manually input Home Network SSID before running setup. 

121611 FIRMWARE RELEASE NOTES:
- User Interface Graphical Updates.
- Fixed Router Channel Change Disconnects. 
	- Repeater now reconnects automatically when the Router's wireless channel changes.
	- Repeater automatically reconnects in the event of a power outage or router reboot.
- Added Helpful Tips to Interface
- Added Print button on setup summary screen. 


090811 FIRMWARE RELEASE NOTES:
- User Interface Graphical Updates
- Updated Firmware Update Link Address


062311 FIRMWARE RELEASE NOTES:
- Fixed TKIP security issue in Setup Wizard
- Fixed Setup Wizard and Security Page security key input length. Now supports 64 Characters
- Added Firmware version report in Upgrade Firmware menu
- Added Auto-Load Menu (Auto-DNS) enable and disable feature
	- Enables use of Static IP address and accessing the Setup Menu via a IP address 
	  instead of setup.ampedwireless.com
	- Allows user to disable the feature: 
		 - Setup page automatically loads when connection to home network is dropped

040811 FIRMWARE RELEASE NOTES:
- Setup page automatically loads when connection to home network is dropped
- Changed default Extended Network security setting from WPA2 to WPA
- Fixed TKIP accessibility issue in security menu
- Added Home Network Signal Strengh display in Status Page

021711 FIRMWARE RELEASE NOTES:
- IPhone dropped connection fixed
- DNS issue with 2Wire modem/routers and other various modem/routers fixed
- Error page not appearing during failed connections using the Smart Setup Wizard
- Repeater Status date and time display fixed